Comquip Equipment Sales, Toronto

Skid steer rims
We regularly stock more than 100 rims in most common sizes, new, used and new take-offs, as well as a number of rarer and harder to find sizes. Stock changes regularly, below are actual pictures of our inventory but are mostly representative of what we have and pricing.  Best is to come by and have a look for yourself and come prepared to buy one or more....bring along one of your old rims or at least take pictures and bring them and measurements along.
When listing the rim sizes below we will note the more common size identification - that being the size of tires that would be installed on them (such as 10 x 16.5) which is far easier to read on the sidewall of the tire, rather than the actual rim size (such as 8.25 X 16.5, the same rim as our 10 x 16.5 example) as those ratings are far less common and much harder to read on the actual rim - usually that number is punched very small and on inside of rim, basically unreadable.

10-16.5  (tire size)  Used  $100 ea
bolts: 8 bolt (standard)
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Bobcat brand
colour: Bobcat orange
application: universal rim, fits on most all machines, most makes and models of modern machines in mid-size range (5-ft wide machines typically)
Bobcat models: many - 743-773, S130-S185 and more
Bobcat part number: 7 232 566, was 6 730 771, 6 562 774, 6 565 239, 6 547 111 and other previous part numbers
Condition: used (picture is actual, but look may vary slightly from unit to unit)
Price: $100 each for used, typically (price varies with condition of rim, if exceptionally rough $75, if exceptionally clean perhaps $120) 
Stock: currently 8+, normally we do have some, but check first - these are one of the most popular and sell quickly, especially clean used ones
Skid steer rims
Widest range of sizes, fits most makes and models; new and used
10-16.5  (tire size)  New take-offs /demo's  $150 ea
bolts: 8 bolt (standard)
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Bobcat brand
colour: Bobcat orange
application: universal rim, fits on most all machines, most makes and models of modern machines in mid-size range (5-ft wide machines typically)
Bobcat models: many - 743-773, S130-S185 and more
Bobcat part number: 7 232 566, was 6 730 771, 6 562 774, 6 565 239, 6 547 111 and other previous part numbers
Condition: new take-offs or demo's.  Basically new but have had tire mounted and removed by dealer, but never been used on a jobsite
Price: $150 each for take-offfs/demos
Stock: currently about 6, limited supply, we get more on sporadically
10-16.5  (tire size)  New $160 ea
bolts: 8 bolt (standard)
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Bobcat brand
colour: Bobcat orange
application: universal rim, fits on most all machines, most makes and models of modern machines in mid-size range (5-ft wide machines typically)
Bobcat models: many - 743-773, S130-S185 and more
Bobcat part number: 7 232 566, was 6 730 771, 6 562 774, 6 565 239, 6 547 111 and other previous part numbers
Condition: new from factory, still on skid
Price: $160 each for new
Stock: currently about 20, we normally keep a decent supply in stock
10-16.5  (tire size)  New $190 ea
bolts: 8 bolt (standard)
offset: negative offset (flange where studs bolt on to the axle is closer to the outer edge of rim, brings wheel in closer to machine)
make: Bobcat brand
colour: Bobcat orange
application: fits specific machines with axles that protrude out farther than with most machines, this rim keeps the wheels from sticking out too far
Bobcat models: 763, 773, S175, S185, some S220
Bobcat part number: 7 232 568, was 6 730 775 and possibly other previous part numbers
Condition: new from factory, possibly some demo's
Price: $190 each for new, if used or demos are in stock they may be $20-25 less (note: these are less common and are more expensive from Bobcat)
Stock: some, less than half dozen
12-16.5  (tire size)  Used $125 ea
bolts: 8 bolt (standard)
offset:  standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Bobcat brand
colour: Bobcat orange
application: universal rim, fits on most all machines, most makes and models of modern machines, full size frame units (6-ft wide machines typically)
Bobcat models: 843-873, S200-S300
Bobcat part number: 7 232 567, was 6 730 772 and possibly other previous part numbers
Condition: used (picture is actual, but look may vary slightly from unit to unit)
Price: $125 each for used, typically (price varies with condition of rim, if exceptionally rough $100, if exceptionally clean perhaps $150) 
Stock: some, less than half dozen
27 x 8.50-15  (tire size)  Used from $40 ea
bolts: 6 bolt
offset: regular offset (flange where studs bolt on to the axle is closer to the outer edge of rim, brings wheel in closer to machine)
make: Case
colour: Case power tan
application: fits specific machines - 6 bolt and use 15" tires - really only the Case 1825/1825B that we know of
Case models: 1825, 1825B, possilbly some older Case machines of this same size
Condition: what we have now (rare, hard to find) vary from rough (at least 1 needs a weld to repair) to decent to some very nice conditon
Price: $40 for the roughest, to $75-100 the decent ones (need paint/clean-up) to $150-175 for the nicest (note: Case rims are very expensive, compare to dealer new at $375+ each)
Stock: up to 10 currently
12-16.5  (tire size)  New $240 ea
bolts: 8 bolt (standard)
offset: negative offset (flange where studs bolt on to the axle is closer to the outer edge of rim, brings wheel in closer to machine)
make: Bobcat brand
colour: Bobcat orange
application: fits specific machines with axles that protrude out farther than with most machines, this rim keeps the wheels from sticking out too far
Bobcat models: 863-873, S250-S330
Bobcat part number: 7 232 565, was 6 733 578 and possibly other previous part numbers
Condition: new from factory, possibly some demo's
Price: $240 each for new, if used or demos are in stock they may be about $25 less (note: these are less common and are more expensive from Bobcat)
Stock: 8-10
6" wide x 15" diameter rim  (rim size; tire size unknown but probably 27 x 8.515)  Used $100 
bolts: 8 bolt (standard), 6" centre hole
offset: standard (neutral, in middle)
make: Bobcat brand
colour: Bobcat orange
application: fits specific machines - probably older model 600 or 700 series (?) that needs an 8-bolt and 15" dia rim (rare!)
Bobcat models: 600 or 700 series?
Bobcat part number: possibly 6 551 892, 6 562 777, or 6 547 112 and possibly other previous part numbers
Condition: used, good shape
Price: $100
Stock: 1
23 x 8.50-15  (tire size)  Used $100 ea
bolts: 6 bolt
offset: standard (neutral, in middle)
make: Bobcat brand
colour: Bobcat orange
application: fits specific machines - 4-ft wide models with 23-8.5-15 tires and 6-bolt hubs
Bobcat models: 543, 553, S100 (and older models such as 542B, possibly others); could work on Case 1825/1825B as well - very similar
Bobcat part number: 7 225 126
Condition: used but in very good condiiton, no cracks, dings or dents.  paint is decent with a bit of chipping
Price: $100 each for used. (We can get new in this as well, $150 ea); picture shown has 2 sets of 6 holes (12 total, only 6 used), others may vary a bit
Stock: 4-5
23 x 8.50-12  (tire size)  New $135 ea
bolts: 5 bolt
offset: standard offset
make: Bobcat brand
colour: Bobcat orange
application: fits only S70 model - this is the wide-stance mode where with wider tires the machine measures 44" in width
Bobcat models: S70 only (wider stud holes)
Bobcat part number: 7 225 125
Condition: new from factory
Price: $135 each new
Stock: some, about half dozen
12-16.5  (tire size)  Demo/take-offs $150 ea
bolts: 8 bolt (standard)
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: aftermarket (possibly Titan, makers of most rims OEM for the big names like Bobcat, Cat, Deere, etc)
colour: grey
application: universal rim, fits on most all machines, most makes and models of modern machines, full size frame units (6-ft wide machines typically)
Bobcat models: S250-S330 (these 8 came off 2 Bobcat S300's, demo) but will work on most any big skid steer of any make
Note: These are not OEM-painted but are excellent rims, heavier duty than many OEM brand named rims
Condition: demo/lighly used take offs from dealer, may have had some short-term use before customer traded up to solids
Price: $150 ea
Stock: 8.  Limited number only
12-16.5  (tire size)  New $175 ea
bolts: 8 bolt (standard)
offset:  standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Bobcat brand
colour: Bobcat orange
application: universal rim, fits on most all machines, most makes and models of modern machines, full size frame units (6-ft wide machines typically)
Bobcat models: 843-873, S200-S300
Bobcat part number: 7 232 567, was 6 730 772 and possibly other previous part numbers
Condition: new from factory
Price: $175 each for new  (if demo/new take-offs, about $150) 
Stock: new, out of stock at moment, or down to ones and twos - should be getting in more soon; may have some demo/take-offs in now though
23 x 8.50-12  (tire size)  New $135 ea
bolts: 5 bolt
offset: standard offset
make: Bobcat brand
colour: Bobcat orange
application: fits only 453, 463 models - this is the wide-stance mode where with wider tires the machine measures 44" in width
Bobcat models: 453-463 only (smaller stud holes)
Bobcat part number: 7 225 124
Condition: new from factory
Price: $135 each new
Stock: 4
23 x 8.50-12  (tire size)  New $140 ea (need to verify this price...)
bolts: 5 bolt
offset: negative offset (flange where studs bolt on to the axle is closer to the outer edge of rim, brings wheel in closer to machine)
make: Bobcat brand
colour: Bobcat orange
application: fits probably 443-463 models - for wider-stance mode but wheels tuck in a bit more than regular - check for adequate clearance
Bobcat models: probably 443-463 only (smaller stud holes)
Bobcat part number
Condition: new from factory
Price: $140 each new
Stock: 4
5.70 x 12  (tire size)  New $95 ea
bolts: 5 bolt
offset: standard offset
make: Bobcat brand
colour: Bobcat orange
application: fits only S70 model -this is the narrow-stance mode where with narrow tires the machine measures 36" in width
Bobcat models: S70 only (larger stud holes)
Bobcat part number: 7 225 123
Condition: new from factory
Price: $95 each new
Stock: 0, more coming
5.70 x 12  (tire size)  New $150 ea
bolts: 5 bolt
offset: standard offset
make: Bobcat brand
colour: Bobcat orange
application: fits only 443, 463 models - this is the narrow-stance mode where with narrow tires the machine measures 36" in width
Bobcat models: 443-463 only (smaller stud holes)
Bobcat part number: 7 225 122
Condition: new from factory
Price: $150 each new (older part items from Bobcat are often more expensive)
Stock: 2?
12-16.5  (tire size)  Used $125 ea
bolts: 8 bolt (standard)
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: New Holland
colour: yellow
application: universal rim, fits on most all machines, most makes and models of modern machines, full size frame units (6-ft wide machines typically)
New Holland models: many, probably LS 180 and bigger, other models, will also work on most any big skid steer of any make
Condition: used but in very good condiiton, no cracks, dings or dents.  paint is decent with a bit of chipping
Price: $125
Stock: 1
12-16.5  (tire size)  Used $175 ea
bolts: 8 bolt (standard)
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Case
colour: Case power tan
application: universal rim, fits on most all machines, most makes and models of modern machines, full size frame units (6-ft wide machines typically)
Case models: came off an 1845C, will probably work on many Case models incl 75XT and up, some 400-series, and other makes
Condition: used but in very good condiiton, no cracks, dings or dents.  paint is decent with a bit of chipping
Price: $175 (note: Case rims are very expensive, compare to dealer new at $350+)
Stock: 1
10-16.5  (tire size)  Used $125 ea
bolts: 8 bolt (standard)
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Caterpillar
colour: yellow
application: niversal rim, fits on most all machines, most makes and models of modern machines in mid-size range (5-ft wide machines typically)
Caterpillar models: known to have come off a 242, will work on other similar sized models, will also work on most any big skid steer of any make
Condition: used but in very good condiiton, no cracks, dings or dents.  paint is decent with a bit of chipping
Price: $125
Stock: 4-5
10-16.5  (tire size)  Used $150 ea
bolts: 6 bolt
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Case
colour: Case power tan
application: fits few models - Case 1840 - with 6 bolt, 16.5" tires
Case models: Case 1840, possible some older units from the 70's and 80's
Condition: used but in decent condiiton, no cracks, could use wire brush clean up and paint
Price: $150 (note: Case rims are very expensive, compare to dealer new at $375+)
Stock: 4-10
10-16.5  (tire size)  Used $150 ea
bolts: 6 bolt
offset: standard (or neutral; flange where studs bolt on to the axle is about mid-point on the wheel, between both inner and outer edges of rim)
make: Ford
colour: yellow
application: fits few models - Case 1840 - with 6 bolt, 16.5" tires, came off a Ford skid steer, CL40 from 80's
Case models: Case 1840, possible some older units from the 70's and 80's
Condition: used but in decent condiiton, no cracks, could use wire brush clean up and paint
Price: $150 (note: Case rims are very expensive, compare to dealer new at $375+ ea), may have tires on them still - if wanted with the tires will be extra
Stock: 4